 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ALUMINUM ELECTROLYTIC CAPACITORS HN Ultra Low Impedance series Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C Lower impedance than HM series. Adapted to the RoHS directive (2002/95/EC). HZ Low Impedance HN Low Impedance HM Specifications Category Temperature Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current 25 ~ +105uC 6.3 ~ 16V 330 ~ 8200F 20% (120Hz, 20uC) After 2 minutes' application of rated voltage, leakage current is less than 0.03CV For capacitance of more than 1000F, add 0.02 for every increase of 1000F Rated voltage (V) tan d 6.3 10 120Hz 20uC 16 0.22 0.19 tan d (MAX.) 0.16 120Hz Rated voltage (V) 6.3 10 16 Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) ZN25uC / Z+20uC 3 3 3 After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105uC the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed below. Endurance Capacitance change Within 30% of initial value tan d 200% or less of initial specified value Leakage current lnitial specified value or less Marking Printed with gold color on black sleeve. ltem Performance Characteristics Sleeve : BLACK Radial Lead Type Sleeve (P.E.T.) fD+0.5MAX. fd Type numbering system (Example : 6.3V 1800F) UHN 0 J 1 8 2 MPD P 0.5 123 45 678 9 10 11 12 L+1.5MAX. Pressure relief vent 15MIN 4MIN fD P fd 8 3.5 0.6 10 12.5 16 5 5 7.5 0.6 0.6 0.8 (mm) Size code Configuration Capacitance tolerance (20%) Rated capacitance (1800F) Rated voltage (6.3V) Series name Type Configuration Pb-free leadwire fD Pb-free PET sleeve 8 a 10 PD 12.5 a 16 HD 10 (1A) 16 (1C) * Please refer to page 21 about the end seal configulation. Standard ratings Impedance Rated ripple Item Casesize C (m1/2) MAX. fD L (mArms) Cap. (F) ode 20uC / 100kHz 105uC / 100kHz (mm) 330 331 470 471 8 11.5 21 1300 560 561 680 820 1000 1200 1500 1800 2200 2700 3300 4700 5600 8200 V (Code) 6.3 (0J) Case size fD L (mm) 8 11.5 8 11.5 10 12.5 10 12.5 10 12.5 10 16 8 20 10 16 10 16 8 20 10 20 10 25 12.5 20 12.5 20 12.5 25 12.5 25 16 25 Impedance Rated ripple (m1/2) MAX. (mArms) 20uC / 100kHz 105uC / 100kHz 21 21 18 18 18 11 12 11 11 12 10 9 9 9 8 8 7 1300 1300 1760 1760 1760 2280 2220 2280 2280 2220 2900 3190 3190 3190 3370 3370 3610 Impedance Case size Rated ripple (m1/2) MAX. fD L (mArms) 20uC / 100kHz 105uC / 100kHz (mm) 8 11.5 21 1300 8 11.5 21 1300 10 12.5 18 1760 10 12.5 8 20 10 16 10 16 10 16 8 20 10 20 10 20 10 20 10 25 12.5 20 12.5 20 12.5 25 12.5 25 16 25 18 12 11 11 11 12 10 10 10 9 9 9 8 8 7 1760 2220 2280 2280 2280 2220 2900 2900 2900 3190 3190 3190 3370 3370 3610 681 821 102 122 152 182 222 272 332 472 562 822 8 11.5 8 15 10 12.5 8 15 10 12.5 8 20 10 16 10 16 8 20 10 16 10 20 10 20 10 25 12.5 20 12.5 20 12.5 25 16 25 21 20 18 20 18 12 11 11 12 11 10 10 9 9 9 8 7 1300 1700 1760 1700 1760 2220 2280 2280 2220 2280 2900 2900 3190 3190 3190 3370 3610 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. : In this case, n will be put at 12th digit of type numbering system. : In this case, c will be put at 12th digit of type numbering system. : In this case, . will be put at 12th digit of type numbering system. CAT.8100V |
Price & Availability of UHN1C331MPD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |